产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

对于体积和重量比较大的设备,且对于安装的准确性要求比较高

网址:www.diaoche.aou1.cn  2021-10-21  作者:admin    阅读:

对于体积和重量比较大的设备,且对于安装的准确性要求比较高,因此搬运、吊装就位在安全、技术的要求方面较高,需要组织有经验的专业的吊装人员进行就位施工。在安装过程中,必须保证施工的质量和整体外观的美观,因此,对于每一次的大型吊装设备运输,都要提前做好完备的方案。
For equipment with large volume and weight and high requirements for installation accuracy, handling and hoisting in place have high safety and technical requirements, so experienced professional hoisting personnel need to be organized for in place construction. During the installation process, the construction quality and overall appearance must be guaranteed. Therefore, for each transportation of large hoisting equipment, a complete scheme must be made in advance.
图片
picture
成立设备吊装运输小组,由组长负责,组员由现场技术人员、安全员以及工人组成。技术人员根据设备型号、安装位置,确定运输路线,选用运输吊装工具,并负责设备吊装运输方案的交底。安全员负责安全技术要求的审核及各类工具、机具安全性能的复核。组长负责设备运输吊装安全交底、方案的实施及组织人力、物力完成整个运输吊装过程。
Set up an equipment hoisting and transportation team, which is in the charge of the team leader, and the team members are composed of on-site technicians, safety officers and workers. Technicians shall determine the transportation route, select transportation and hoisting tools according to the equipment model and installation position, and be responsible for the disclosure of equipment hoisting and transportation scheme. The safety officer is responsible for reviewing the safety technical requirements and the safety performance of various tools and machines. The team leader is responsible for the safety disclosure of equipment transportation and hoisting, the implementation of the scheme, and organizing human and material resources to complete the whole transportation and hoisting process.
吊车驾驭员作业时精力要会集,禁绝有吃零食,接打手机,闲谈,吸烟等阻碍起重作业的行为,以防精力分散,形成起重事端。吊车框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具驾驭员在起重装卸中一直作业不要超过3小时,超过3小时应中止作业,歇息1至2小时后最后进行作业,以体状况不佳,形成起重事端。
Crane drivers should concentrate their energy during operation. It is forbidden to eat snacks, pick up and call mobile phones, chat, smoke and other behaviors that hinder lifting operation, so as to prevent energy dispersion and lifting accidents. The crane operator shall not operate for more than 3 hours during lifting and loading. If it exceeds 3 hours, the operation shall be suspended, and the operation shall be carried out after resting for 1 to 2 hours, so as to form a lifting accident due to poor physical condition.

返回新闻

网站出租电话
13313028229